Skip to content

Amo Tokyo

Actu

Euro 6 and Euro 6d Standards: What’s the Difference for Conventional Petrol Cars?

The difference between Euro 6 and Euro 6d is not simply a matter of progressively stricter limits. For petrol engines, the caps…

Technicien automobile inspectant le pot d'échappement d'une voiture essence conforme à la norme Euro 6 dans un centre de contrôle technique
5 min

The difference between Euro 6 and Euro 6d is not simply a matter of progressively stricter limits. For petrol engines, the regulatory NOx and CO limits are identical under Euro 6b and Euro 6d. What changes dramatically is the measurement protocol and the treatment of fine particles. Understanding this distinction helps avoid costly mistakes, particularly when buying a used vehicle intended for use in a low-emission zone.

RDE protocol and WLTP cycle: what Euro 6d approval actually measures on a petrol engine

Euro 6 (in its original 6b version) was based on the NEDC cycle, a laboratory protocol that did not closely reflect real-world conditions. Euro 6d-TEMP introduced RDE (Real Driving Emissions) tests with a provisional conformity factor. Euro 6d imposes a stricter final RDE conformity factor.

For petrol engines, NOx emissions measured in the laboratory already met the regulatory limit. Real-world testing revealed discrepancies, particularly during cold starts, driving at altitude or in low temperatures. A conventional petrol vehicle and the Euro 6d standard therefore do not offer the same emissions guarantees as a Euro 6b vehicle, even if the stated regulatory limits appear identical on paper.

However, Euro 6d approval does not guarantee consistent emissions in all circumstances. The journey, ambient temperature and length of time spent driving with a cold engine all affect the results. The assessment protocol described by the Ministry for the Ecological Transition and IFPEN for Euro 6d-TEMP vehicles illustrates these limitations: test conditions cover a range of situations, not every real-world scenario.

Close-up of a modern car's petrol engine fitted with an emissions control system compliant with Euro 6d standards

Direct-injection petrol engines and particulate filters: the technical variable hidden behind the Euro 6d label

Direct-injection petrol engines, now the norm thanks to downsizing and turbocharging, produce more fine particles than older indirect-injection engines. The Euro 6c and then Euro 6d regulations lowered the particulate emissions limit for petrol engines to the same level as that required for diesel engines fitted with a filter.

Some manufacturers responded by fitting a gasoline particulate filter (GPF) to their direct-injection models. The presence of this device cannot be determined from the “Euro 6d” wording on the registration certificate alone. Two petrol vehicles bearing the same approval designation may therefore differ in this respect: one may have a GPF, while the other relies on optimised engine calibration without a dedicated filter.

For used-car buyers, this distinction has practical implications. A GPF ages, becomes clogged and may require specific maintenance. By contrast, an engine without a GPF but approved to Euro 6d has been calibrated to meet the limits without additional filtration, which involves other combustion trade-offs. Checking the manufacturer’s technical specifications or the details of the engine remains the only reliable way to confirm.

Field V.9 of the registration certificate: identifying the exact variant of a used petrol vehicle

Inferring a vehicle’s Euro standard from its year of registration or model name is a risky shortcut. The same model sold over several years may include engines approved to Euro 6b, Euro 6d-TEMP or Euro 6d, depending on the production date and engine version.

Field V.9 of the registration certificate identifies the exact approval variant. This is the information that counts, not the date of first registration. It can be used to find the applicable Euro standard in European type-approval databases.

Here are the checks to carry out when buying a used vehicle:

  • Locate field V.9 on the registration certificate and cross-check it against the manufacturer’s technical documentation to confirm the engine’s exact Euro standard
  • Do not confuse the date of first registration with the type-approval date: a vehicle registered in 2020 may be approved to Euro 6d-TEMP rather than Euro 6d
  • Separately check whether the identified engine is permitted in the relevant low-emission zone, as rules vary from one urban area to another

Euro standard and low-emission zone eligibility: two separate questions

The relationship between a Euro standard and the right to drive in a low-emission zone depends on the area. Each zone sets its own access thresholds, restriction schedules and exemptions. A Euro 6d vehicle is not automatically permitted everywhere, and a Euro 6b vehicle may still be allowed in some zones under the local rules in force.

Before buying, we recommend checking the municipal or metropolitan regulations for the relevant low-emission zone. The Crit’Air rating, assigned based on the engine and Euro standard, is the practical criterion for access, but its implications vary according to each urban area’s own schedule.

Automotive journalist comparing two petrol vehicles from different generations, illustrating the evolution of Euro 6 and Euro 6d standards

Euro 6d for petrol engines: what approval changes in practice for resale and everyday use

On the used-car market, the Euro 6d designation has become a selling point for petrol vehicles. It indicates that a vehicle was approved under the most demanding protocol of the Euro 6 generation, with validated real-world testing.

Euro 6b and Euro 6d-TEMP vehicles depreciate faster in urban areas where low-emission zone restrictions are gradually tightening. Buyers planning to resell in the medium term would be wise to target a Euro 6d vehicle from the outset, even if the initial price premium seems modest.

In everyday use, the difference between Euro 6b and Euro 6d in a petrol engine is barely noticeable in terms of performance or fuel consumption. The benefit lies in real-world pollutant emissions (NOx and particulates) and the vehicle’s long-term regulatory viability as restrictions on urban driving increase.

The transition from Euro 6 to Euro 6d for petrol engines is not reflected in the headline regulatory limits, but in the rigour of the testing protocol and the treatment of fine particles. When buying used, checking field V.9 on the registration certificate and independently verifying eligibility for the local low-emission zone are two essential steps to make a habit of.

Euro 6 and Euro 6d Standards: What’s the Difference for Conventional Petrol Cars?